Make a bootable Pen drive & boot Computer

Make a bootable Pen drive & boot Computer

Boot-able Pen drive
Hello friends, today I shall tell you how to make a bootable USB flash drive. It is very essential to know to make a bootable USB flash drive (Pen drive, External hard disk etc.). Because sometimes it may be your DVD/CD RW drive does not work, or you are using mini laptop and you have no DVD/CD RW drive. In this situation if you want to change or reinstall your operating system, you should to know how to make a bootable USB flash drive. For this you require image file of an operating system, an USB flash drive and 'Power ISO' or 'Novicorp Win To Flash' software.

Boot-able Pen drive

Using Power ISO Software
First install Power ISO software.
Keep the image file of an operating system into your hard disk or anywhere.
Connect an USB flash drive (Pen Drive).
Open Power ISO and go to tools and click on Create Bootable USB Drive.
Select the Image file as Source Image File. Set your USB flash drive (pen drive) as Destination USB Drive and click on Start button. It will take a few minutes.
Power ISO software : Download
Using Novicorp Win To Flash

You required installation CD/DVD or .iso image file of operating system, a flash drive (pen drive), Novicorp Win To Flash software.

If you use installation CD/DVD :
Open 'Novicorp Win To Flash' folder and click on Win To Flash application software.
Now click on Task and select Task type.
Transfer Windows  XP/2003 setup to USB drive
Transfer Windows Vista/2008/7 setup to USB drive

Select File system to FAT16 LAB. (Note: This will make your pen drive memory half. You could recover it again.)

Click on Run. Select Windows files source path (CD/DVD source path where installation CD/DVD insert) and USB drive (Pen drive or other USB flash drive path). Now click on Run.
If you use .iso Image file
You would have to install Power ISO or Daemon tools to make a virtual CD drive.
After install the software, mount the .iso image file.
Now follow the above steps (using installation CD/DVD) and at last step select Windows file source path as virtual CD drive.

Novicorp Win To Flash software : Download

Now you can use your USB flash drive as like as an optical hard disk drive (CD/DVD).

Make a bootable Pen drive & boot Computer

Boot-able Pen drive
Hello friends, today I shall tell you how to make a bootable USB flash drive. It is very essential to know to make a bootable USB flash drive (Pen drive, External hard disk etc.). Because sometimes it may be your DVD/CD RW drive does not work, or you are using mini laptop and you have no DVD/CD RW drive. In this situation if you want to change or reinstall your operating system, you should to know how to make a bootable USB flash drive. For this you require image file of an operating system, an USB flash drive and 'Power ISO' or 'Novicorp Win To Flash' software.



Using Power ISO Software
First install Power ISO software.
Keep the image file of an operating system into your hard disk or anywhere.
Connect an USB flash drive (Pen Drive).
Open Power ISO and go to tools and click on Create Bootable USB Drive.
Select the Image file as Source Image File. Set your USB flash drive (pen drive) as Destination USB Drive and click on Start button. It will take a few minutes.
Power ISO software : Download
Using Novicorp Win To Flash

You required installation CD/DVD or .iso image file of operating system, a flash drive (pen drive), Novicorp Win To Flash software.

If you use installation CD/DVD :
Open 'Novicorp Win To Flash' folder and click on Win To Flash application software.
Now click on Task and select Task type.
Transfer Windows  XP/2003 setup to USB drive
Transfer Windows Vista/2008/7 setup to USB drive

Select File system to FAT16 LAB. (Note: This will make your pen drive memory half. You could recover it again.)

Click on Run. Select Windows files source path (CD/DVD source path where installation CD/DVD insert) and USB drive (Pen drive or other USB flash drive path). Now click on Run.
If you use .iso Image file
You would have to install Power ISO or Daemon tools to make a virtual CD drive.
After install the software, mount the .iso image file.
Now follow the above steps (using installation CD/DVD) and at last step select Windows file source path as virtual CD drive.

Novicorp Win To Flash software : Download

Now you can use your USB flash drive as like as an optical hard disk drive (CD/DVD).

If you use USB flash drive instead of optical hard disk drive (CD/DVD) you need to change Boot Option from BIOS Setup Utility. From Boot Order option set USB Hard Disk as your 1st choice.

1st Choice USB Hard Disk
Video tutorial : Make a bootable USB flash drive using Power ISO

Make a bootable Pen drive & boot Computer

Boot-able Pen drive
Hello friends, today I shall tell you how to make a bootable USB flash drive. It is very essential to know to make a bootable USB flash drive (Pen drive, External hard disk etc.). Because sometimes it may be your DVD/CD RW drive does not work, or you are using mini laptop and you have no DVD/CD RW drive. In this situation if you want to change or reinstall your operating system, you should to know how to make a bootable USB flash drive. For this you require image file of an operating system, an USB flash drive and 'Power ISO' or 'Novicorp Win To Flash' software.



Using Power ISO Software
First install Power ISO software.
Keep the image file of an operating system into your hard disk or anywhere.
Connect an USB flash drive (Pen Drive).
Open Power ISO and go to tools and click on Create Bootable USB Drive.
Select the Image file as Source Image File. Set your USB flash drive (pen drive) as Destination USB Drive and click on Start button. It will take a few minutes.
Power ISO software : Download
Using Novicorp Win To Flash

You required installation CD/DVD or .iso image file of operating system, a flash drive (pen drive), Novicorp Win To Flash software.

If you use installation CD/DVD :
Open 'Novicorp Win To Flash' folder and click on Win To Flash application software.
Now click on Task and select Task type.
Transfer Windows  XP/2003 setup to USB drive
Transfer Windows Vista/2008/7 setup to USB drive
Select File system to FAT16 LAB. (Note: This will make your pen drive memory half. You could recover it again.)

1st Choice USB Hard Disk

Click on Run. Select Windows files source path (CD/DVD source path where installation CD/DVD insert) and USB drive (Pen drive or other USB flash drive path). Now click on Run.
If you use .iso Image file
You would have to install Power ISO or Daemon tools to make a virtual CD drive.
After install the software, mount the .iso image file.
Now follow the above steps (using installation CD/DVD) and at last step select Windows file source path as virtual CD drive.

Novicorp Win To Flash software : Download

Now you can use your USB flash drive as like as an optical hard disk drive (CD/DVD).

If you use USB flash drive instead of optical hard disk drive (CD/DVD) you need to change Boot Option from BIOS Setup Utility. From Boot Order option set USB Hard Disk as your 1st choice.

1st Choice USB Hard Disk
Video tutorial : Make a bootable USB flash drive using Power ISO

1st Choice USB Hard Disk

If you use USB flash drive instead of optical hard disk drive (CD/DVD) you need to change Boot Option from BIOS Setup Utility. From Boot Order option set USB Hard Disk as your 1st choice.

1st Choice USB Hard Disk
Video tutorial : Make a bootable USB flash drive using Power ISO